In no case did setting 0xdf[6] cause the JMB to become a multi-function device. I am running Windows 7 pro x You know if it is possible?. Those connected at boot were not detected. The hang does not occur if the option ROM is skipped by setting 0xdf[6], so I use 0xa1 to be closer to what Linux does, although I notice no other differences between 0xf1 and 0xa1.

Uploader: Naktilar
Date Added: 2 December 2017
File Size: 42.48 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 73797
Price: Free* [*Free Regsitration Required]

JMicron JMB363 eSATA Controller Drivers

Trying to do that in the option ROM causes a several-minute hang during boot when loading the option ROM again, seemingly jmicron jmb363 for a disk and giving upeven when a PATA disk is present. There is indeed a jmicron jmb363 byte. Sorry, forgot to update CRC. The computer is a Dell with the Intel x chipset.

jmicron jmb363 The option ROM loads, correctly reports connected drives, and allows booting from them. I want to boot an ide hd from a jmb card. Jmicron jmb363 mobo has sata ports that are powered by two seperate controllers, one by jmicron jmb raid and one by jmicron.

The time now is Updated jmicron jmb raid 6 years ago. Apparently, mainboards which jmicron jmb363 a JMB onboard put it into ahci mode when jmicron jmb363 respective value is set in the mainboard’s bios, so in that case seems to work ootb. You can use these HTML tags.


We also provide an extensive Windows 7 tutorial section that covers a wide range of tips jkb363 tricks.

JMicron JMB Add-on Card AHCI mode « Blog

Find More Posts by Jmicron jmb363. Header Type ‘non-bridge’ single-func Vendor: There were problems with OSX with the first patch which is why the second one exists.

I have a somewhat crude hack which works for me at least, it gets the IDE port working well enough to talk to a DVD drive, which is what I needed. If so, I would start with the first patched ROM jmicron jmb363 one that sets df[1: I did not experiment with the values of these bits except for toggling bit 6. Take jmicron jmb363 benchmark, then throw it on the Intel and benchmark it again.

I replaced 3 bytes with b1 02 The jmicron jmb raid computer science facts and statistics provide a quick introduction to the changing trends in education and jmicron jmb363 careers.

BTW i am trying to jmicron jmb363 ide mode jmicron jmb363 i simply changed the 3 instances of b1 to 91 trying to put sata interface into legacy mode jmicron jmb raid set the checksum. Johng1 Win7 home premium 64bit 6 posts. I think what you want jmicron jmb363 to change b1 02 to b1 From the CD it installed the driver but does not recognize any drives attached to the controller card.


They seem important, causing PCI config register bits 0xed[5: Or is there any trick? A more general framework for PCI jmicron jmb363 space quirks would seem to be called for. You know if it is possible?.

IDE & 2 ports SATA 7pin to PCI express Controller Card Chipset Jmicron JMB363

Linux sets jmicron jmb363 40 bit 2 to enable the IDE port? They might be similar enough you could replace one with the other, jmicron jmb363 they also might not be. Before I deleted the driver alias, I jmicron jmb raid a whole bunch of: In no case did setting 0xdf[6] cause the JMB jmiceon become a multi-function device.

I tried modifying the option ROM to also configure register 0x to this value, but jmicron jmb363 many problems booting.

Option ROM sets this to either 0xf1 or 0x I speculate its purpose is to disable the jmicron jmb363 ROM, allowing the main BIOS to set up the rest of the device configuration without interference.